TYPE OF PACKAGING:PLASTIC CRATE.
ELECTRICAL POWER:440V,60HZ,3 PHASE.
CONTROL VOLTAGE:24VDC
BUILD-IN CARTON CONVEYOR.
SWITH CABINET READY FOR CONNECTING TO THE MAINS.
LIFTING MOTION BY HYDRAULIC OR MOTOR.
SAFETY DEVICE TO STOP MACHINE WHEN DISTURBANCE OCCURRED.
SEQUENCE CONTROL.
THIS MACHINE INCLUDES THE FOLLOWING 3 ITEMS OF MAIN COMPONENTS:
(A) MAIN DRIVE :
THE GRIPPER HEAD ASSEMBLY MOVES FORWARD & BACKWARD AND DONE BY THE MOTOR
SYSTEM TRANSFER PRESSURE TO THE CYLINDER VIA CHAINS TO CONTROL OF PUSH
FORWARD AND RETRACT. WHEN CYLINDER ACTUATES TO DRIVE THE CHAIN, IT CREATES
THE FUNCTION OF FORWARD & BACKWARD FOR THE PURPOSE OF PACKING AND UNPACKING.
THE GRIPPER HEADS IS PNEUMATIC TYPE.
(B) CASE CONVEYOR:
CASE CONVEYOR INCLUDES TOP CHAIN, MAIN DRIVE, PE CELL & CASE STOPPER. WHEN
GRIPPING CYCLE FINISHES, THE STOPPER IS DOWNWARD AND THEN THE CONVEYOR IS
RUNNING TO TAKE AWAY THE CASES. AT THIS TIME, THE STOPPER GOING UPWARD TO
STOP THE CASES AT THE POSITION. WHEN CASES GO TO THE RIGHT POSITION, THE PE
CELL ACTUATES THE CONVEYOR TO STOP. THE BOTTLE POSITIONING DEVICE IS
DOWNWARD FOR PACKING. WHEN THE CYCLE FINISHES, IT RESTARTS ANOTHER CYCLE. IF
THE CASES ARE NOT IN THE RIGHT POSITION, THE GRIPPER HEAD WILL BE WAITING IN
THE HIGHEST POINT.
(C) BOTTLE INFEED CONVEYOR:
THE BOTTLES TRAVEL VIA GUIDE RAIL TO THE CONVEYOR AND BE ARRAYED TO THE
PATTERN FOR PACKING. THE GRIPPER HEAD MOVES DOWNWARD AND THE CONVEYOR STOPS.
THE TWO SIDE CYLINDERS PUSH FORWARD TO PREVENT ANY PRESSURE OCCURS. WHEN
GRIPPING THE BOTTLES, ARRAY DEVICE AT BOTTLE
INLET POSITION, IT PREVENTS BOTTLE JAMMING. WHEN THE GRIPPING CYCLE
FINISHES, THE CYLINDER RETRACTS CONVEYOR AND IT RESTARTS TO CONVEY BOTTLE TO
THE CORRECT POSITION.
